 |
|
 |

Self-Floating PWC Lift
Anchor to any dock, floating or stationary
A wide variety of anchoring hardware is available to use EZ Port
with the complete EZ Dock system, or other types of docks.
Anchor to the EZ Dock System with our Coupler assemblies.
|
Anchor EZ Port to ordinary floating docks with our hinge
kit
|
Anchor to a stationary pier with a pair of pipe brackets
and stand-off brackets.
|
B. EZ Port II
Recommended for PWCs up 800 lb. gross weight.
D. EZ Port
II with extension
Recommended for PWCs up 900 lb. gross weight.
|
There's an EZ Port model that's right for you.
The EZ Port configurations shown
are estimates based on PWC gross weight, including fuel,
oil and cargo. Estimated weight recommendations are intended
to keep the PWC above the waterline. Amount of freeboard
will vary depending on the PWC's weight and option used.
E. EZ Port
3
Recommended for PWCs up 1300 lb. gross weight.
|
|
Specifications
Construction: Linear-low density polyethylene with UV stabilizer.
Minimum thickness of 5/16", up to 3/8" thick in high impact
areas. Color: light beige. |
EZ Port II
127" long, 59" wide, 15" high Section weight: 240 lbs. Approx.
gross load Capacity: 800 lbs. Rollers: 1 fixed stern roller,
1 adjustable middle roller
Part#: 206011PW |
|
EZ Port 3
151" long, 59" wide, 15" high Section weight: 280 lbs. Approx.
gross load capacity: 1300 lbs. Rollers: One fixed stern roller,
Two adjustable middle rollers
Part#: 206013PW |
|
20" Extension
20" long, 59" wide Section weight: 50 lbs. Buoyancy: Offers the
same p.s.f. load capacity as the EZ Port units. Extension adds
approximately 100 lbs. of load support to Original EZ Port and
EZ Port II. Rollers: 1 stern roller
Part#: 206010EX |
|
|
Contact us at 1-888-414-4425
|
|